Back to Contents
| Purchasing PDR Tools – Why It Matters! |
| Picks – PDR Tools for Aluminium |
| Hand Tools |
| Glues and Glue Tools |
| PDR Lighting |
| PDR Rods and Bars |
| PDR Side Panel Tools |
| PDR Whale Tales |
| PDR Accessories |
There are a variety of optional components made available to PDR Technicians that may not always be PDR specific tools but nevertheless used in the PDR industry by at least some technicians.
Hole plugs used to block or plug holes that have been drilled also may be used for plugs that may have been lost
| PDR Tool | Usage | |
| PDR Bonnet Stand | a stand that can have bonnets to be fastened for PDR work on them |  |
| Step Bits | tapered in standard sized steps so that only one drill is required to drill larger holes |  |
| Window Guards | slides in between the door to protect windows from tools scratching when working on dents from inside doors | |
| Window wedges | helps wedge window guards tight and also opens up windows to allow better access | |
| Hammers | a variety of hammers are available for different uses including tapping dents | |
| Known Down | like punches, these are used to knock down the high points and imperfections so that the dent can again be pushed using PDR | |
| S Hooks and Rings | Used for leverage pivot points such as when working on dents suspended through windows or bonnets | |
| Suction Straps | these use suction to connect to the roof and again have a srap hanging down for leverage purposes | |
| Panel Remover | tool that pops out plastic clips that hold panels together | |
| Door Holders | a tool that is used to keep the door in check whilst working on dents | |
| Door Straps | a tool that is wedged in between the closed door to act as a leverage point | |
| Hood props | hold bonnets in position so that dents can be worked on | |
| Insulation Clips | accessories that will replace lost or damaged clips common in most vehicles | |
| Christmas Tree clips | Universal clips used to replace broken plastic clips that hold hood linings for instance – convenient for PDR Technicians if clips for various models are not available | |
| Hole Cutting Tools | ||
| Glue Cutting Spatula | ||
| 12 Volt Inverters to provide power | ||
| 12 Volt Adapters |
